Frequently asked questions – HONDA 2012 Accord Crosstour Navigation User Manual
Page 129

Navigation System 129
2NX_Accord Crosstour 31TP6800
Frequently Asked Questions
When I drive at night, the screen is bright and will not switch
to the night display mode. Why?
Verify the following: The nighttime dash brightness control is not set to
maximum, and Map Color in SETUP is set to Black for Night. See
Switching Display Mode Manually on page
.
The daytime
map
screen is dark like the night display mode,
and it is hard to see. Why?
Verify the following: The Map Color in SETUP is set to White for Day.
See Switching Display Mode Manually on page
How can I input my destination using map coordinates?
The navigation system was not designed for this. However, you can view
the coordinates of an address by pushing in on the Interface Dial, selecting
Show Icon on Map, and moving the Interface Dial left to select
Current Location. See Map Screen Legend on page
How do I change or remove my PIN?
Go to “Personal Information” in the
SETUP
screen (
Other
), and select PIN
Number. Select User 1 or User 2 and enter your existing PIN, and then
you have the choice to change or remove the PIN. See page
I forgot the PIN for Home, or the PIN for personal addresses
(User 1 or User 2). How do I reset it?
PINs are optional. See information regarding PINs on page
. Your dealer
can reset the PIN for you.
CALL is not available on the
Calculate route to
screen.
Why?
Your phone is not paired to HFL, or if your phone is paired, it is in use or
does not have good coverage; press the HFL BACK button.
Problem
Solution
00 2NX_Accord Crosstour_KA.book 129 ページ 2011年6月23日 木曜日 午後5時2分
Intro
Index
Home
SEC
2012 Crosstour