HONDA 2010 CR-V - Manual (Page 51)

Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats have
a rigid-type connector as shown
above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Remove the dual deck cargo shelf
(see page
).
Other LATCH-compatible seats have
a flexible-type connector as shown
above. Route the tether strap over the
seat-back and through the legs of
the head restraint, then attach the
tether strap hook to the anchor,
making sure the tether strap is not
twisted.
5.
4.
3. 6.
117
CONTINUED
If equipped
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
45
Flexible type Rigid type
TETHER
ANCHOR TETHER STRAP HOOK
09/07/29 20:30:17 31SWA630_050