HONDA 2010 CR-V - Manual (Page 165)

If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
Press the A. SEL button. ‘‘A. SEL’’
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM and twelve FM stations in
the preset buttons.
You will see a ‘‘0’’ displayed after
pressing a preset button if auto
select cannot find a strong station for
that preset button.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons as previously described.
press the
A. SEL button. This restores the
presets you originally set.
For information on FM/AM radio
frequencies and reception, see page
.
Each preset button can
store one frequency on AM and two
frequencies on FM.
Select the desired band, AM or
FM.
Use the tune, seek, or scan
function to tune the radio to a
desired station.
Pick a preset number (1 6), and
hold it until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
1.
2.
3.
4.
250
To turn off auto select,
AUTO SELECT Preset
Playing the FM/AM Radio (EX and EX-L models without navigation system)
Fe
a
tu
re
s
159
09/07/16 18:11:53 31SWA630_164