FIAT Barchetta - Manual (Page 96)

95
DIRECTION REPEATERS fig. 18
To change the 12V-5W bulb:
1) Remove press-fit lens A, com-
plete with bulb holder and rubber pro-
tection.
2) Pull back the rubber protection
and remove the bulb holder from the
lens assembly.
3) Remove bulb B by pressing it in
slightly and turning it in an anti-clock-
wise direction.
4) Replace the bulb.
5) Fit the lens on the bulb holder un-
til you hear it click into place, then
reposition the rubber protection.
6) Then fit the whole assembly into
the housing in the bodywork, turning
it slightly to aid installation.
REAR DIRECTION
INDICATORS fig. 19
To change the 12V-21W bulb:
1) Unscrew knob A and remove the
cover.
2) Turn bulb-holder B in an anti-
clockwise direction and remove it.
3) Remove bulb C by pressing it in
slightly and turning it in an anti-clock-
wise direction.
fig. 18
P5S00698m
fig. 19
P5S00699m