FIAT Barchetta User Manual

Page 20

Once you have let go of the lever,

check the seat is firmly locked in the
runners by trying to move it back and
forth. Failure to lock the seat in place
could result in the seat moving unex-
pectedly with obvious dangerous con-
sequences.

Adjusting the reclining seat back

Lift lever B and tilt the back into the

position required. After releasing the
lever, check that the back is locked
properly into position by trying to tilt
it backwards and forwards.

Tipping the seat back forwards

To make it easier to get at the hood

housing, the front seats can be tipped
forwards

To tip the seat back, turn knob C to-

wards the dashboard.

HEAD RESTRAINTS fig. 13

These may be height adjusted by

pulling them upwards or pushing them
downwards.

STEERING WHEEL fig. 14

The wheel can only be ad-
justed while the car is sta-

tionary.

WARNING

The steering wheel is height ad-

justable:

1) move lever A to position 1;

2) adjust the steering wheel;

3) return the lever to position 2 to

lock the wheel in place again.

fig. 13

P5S00628m

fig. 14

P5S00629m

Remember that the head
restraints should be adjust-

ed to support the back of your head
and not your neck. They only per-
form their protective function in
case of an accident when they are
in this position.

WARNING