FIAT Sedici User Manual

Page 97

62J143

Type B (For Diesel Engine Model)

This display shows instantaneous fuel con-
sumption when the vehicle is moving.

However, the display of instantaneous fu-
el consumption can be turned off if you
desire.

NOTE Unless the vehicle is moving, the
display will indicate “--.-”.

You can change the unit indication be-
tween “l/ 100km” or “MPG” and you can
also turn the display off. To change the in-
dication, follow the instructions below.

NOTE
❒ The value of fuel consumption shown

in the display is affected by such as fol-
lowing conditions;

– road condition

– surrounding traffic condition

– driving condition

❒ The information display will be changed

to the state of initialization when you
reconnect the negative (–) terminal to
a battery.

63J148

❒ Turn the ignition switch to the “ACC”

or “ON” position while holding in the
“DISP” knob (c). The unit display of fu-
el consumption will blink the current
unit.

❒ Push the “DISP” knob (c) quickly to

change the display as shown in the
above illustrations.

❒ Push the “DISP” knob (c) for more than

2 seconds, and the unit display will stop
blinking and the display will stay on. If
you don’t operate the “DISP” knob (c)
within about 8 seconds, the unit display
will automatically stop blinking and the
display will stay on.