FIAT Sedici - Manual (Page 196)

195
IMPORTANT To avoid damaging your
cooling system:
❒ Always use a high quality ethylene gly-
col base non- silicate type coolant di-
luted with distilled water at the correct
mixture concentration.
ENGINE COOLANT
SELECTION OF COOLANT
To maintain optimum performance and
durability of your engine, use PARAFLU
UP.
This type of coolant is best for your cool-
ing system as it:
❒ Helps maintain proper engine temper-
ature.
❒ Gives proper protection against freez-
ing and boiling.
❒ Gives proper protection against cor-
rosion and rust.
Failure to use the proper coolant can dam-
age your cooling system. Your authorized
Fiat Dealership can help you select the
proper coolant.
79J006
Petrol engine
❒ Make sure that the proper mix is 50/50
coolant to distilled water and in no case
higher than 70/30. Concentrations
greater than 70/30 coolant to distilled
water will cause overheating conditions.
❒ Do not use straight coolant nor plain
water.
❒ Do not add extra inhibitors or addi-
tives. They may not be compatible with
your cooling system.
❒ Do not mix different types of base
coolants. Doing so may result in accel-
erated seal wear and/ or the possibili-
ty of severe overheating and extensive
engine/ automatic transaxle damage.
COOLANT LEVEL CHECK
Check the coolant level at the reservoir
tank, not at the radiator. With the engine
cool, the coolant level should be between
the “FULL” and “LOW” marks.
79J145
Diesel engine