FIAT Panda Classic User Manual

Page 93

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

It is possible to mount both the traditional
restraint system and the Isofix type one,
one on the left and the other on the right,
for example.

Since sizes are different, it is possible to
install max. two Isofix type seats on the
rear seats using the proper fastening de-
vices or three traditional child’s seats se-
cured by the seat belts. Only traditional
child’s seats can be installed on front seats.

Use only Isofix type child’s seats that have
been designed, experimented and ap-
proved expressly for this car.

Mount the child restraint
system only with the car sta-

tionary. The child restraint system is
properly anchored to the mounting
brackets when clicks are heard. In any
case, keep to the installation instruc-
tions that must be provided by the
child restraint system Manufacturer.

WARNING

PRESETTING
FOR MOUNTING THE
“ISOFIX TYPE” CHILD
RESTRAINT SYSTEM
(where provided)

Fiat Panda is created preset for mounting
the Isofix type child restraint system, a
new European standardised child restraint
system. Isofix type is an additional option
that does not prevent from using tradi-
tional child restraint systems. Isofix type
child restraint system covers three groups:
0, 0+ and 1.

Due to its different anchoring system, the
child’s seat shall be anchored using the
proper metal brackets set between rear
seat back and cushion or in the rear seat
cover, identified by slots A-fig. 13.

fig. 13

F0G0055m