FIAT Panda Classic User Manual

Page 42

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

Preventive demisting procedure

In the event of considerable outside mois-
ture and/or rain and/or considerable dif-
ferences in temperature outside and in-
side the passenger compartment, perform
the following preventive demisting proce-
dure:
❒ knob A turned to red section;
❒ knob C turned to

❒ knob D turned to - with the possi-

bility of passing to position ≤ if the win-
dows do not mist up;

❒ knob B turned to 2

speed.

REAR WINDOW
DEMISTING/DEFROSTING fig. 46

Press button A to turn this function on;
when this function is on the instrument
panel warning light

(

will turn on.

This function is timed and switches off au-
tomatically after about 20 minutes. To cut
out this function press again button (.

IMPORTANT Do not apply stickers on
the inside of the rear window over the
heating filaments to avoid damage that
might cause it to stop working properly.

FAST HEATING

For fast heating of the passenger com-
partment, proceed as follows:
❒ knob A turned to red section;
❒ knob C turned to

❒ knob

turned to -;

❒

knob B turned to - (top fan speed).

Then use the controls to keep the re-
quired comfort conditions and turn knob
C to U.

IMPORTANT With cold engine, you have
to wait for a few minutes to let the sys-
tem fluid reach the operating temperature.

FRONT WINDOW FAST
DEMISTING AND/OR
DEFROSTING

Proceed as follows:
❒ knob A turned to red section;
❒ knob C turned to

❒ knob D turned to -;
❒ knob B turned to - (top fan speed).
After demisting/defrosting, operate the
controls to keep the required comfort.

fig. 46

F0G0143m