FIAT Panda Classic - Manual (Page 142)

SIDE DIRECTION INDICATORS
To change the bulb, proceed as follows:
❒ push the transparent cover A-fig. 27
towards car running direction (it is
pressure-fitted);
❒ remove connector G-fig. 25;
❒ release the bulb holder catch H;
❒ remove the burnt bulb I-fig. 26 and fit
the new bulb;
❒ refit by reversing the above mentioned
operations.
fig. 25 F0G0093m fig. 27 F0G0095m
fig. 26 F0G0094m
140
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
IINDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
❒ remove the burnt bulb F-fig. 24 and fit
the new bulb;
❒ refit by reversing the above mentioned
operations.
To replace the main/dipped beam light
bulb, proceed as follows:
❒ release clip A-fig. 21 and remove cap
B;
fig. 24 F0G0092m