beautypg.com

FIAT Croma User Manual

Page 90

background image

89

SAFETY DEVICES

CORRECT USE OF THE CAR

W

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

Setting the loading surface at
lower level (where provided)

To improve the loading space, lower the
luggage compartment surface fig. 111, as
follows:
❒ raise handle A-fig. 109 pressing in the

point shown by the arrow at “PUSH”,
use the handle to remove the loading
surface from the seat on the suitcase
board by raising it slightly and pulling
it outwards; the knuckle on the seat
side will facilitate this manoeuvre.

To reposition the loading surface to the
upper level proceed as follows:
❒ raise handle A-fig. 109 pressing in the

point shown by the arrow at “PUSH”,
use the handle to raise the loading sur-
face from the boot mat and pull it out-
wards; the knuckle on the seat side
will facilitate this manoeuvre.

ANCHORING THE LOAD

The boot contains the proper hook for
anchoring the required load fig. 113.

fig. 111

F0L0177m

fig. 112

F0L0141m

fig. 113

F0L0138m

Boot loading surface set at
top position can withstand 70
kg max. and 200 kg at bottom
position as shown on the

proper label set under the loading sur-
face (see fig. 112).

070-106 Croma TRW GB 28-09-2007 9:04 Pagina 89