FIAT Croma User Manual

Page 163

162

ARNING

LIGHTS AND MESSAGES

CAR

TECHNICAL

INDEX

DASHBOARD

AND

SAFETY DEVICES

CORRECT USE OF THE CAR

IN AN

EMERGENCY

Note Before replacing the drilled wheel
(if in alloy) in the specific housing, remo-
ve the snap-in logo holder pressing on it
from the its internal side.
❒ For vehicles with steel rims, remove

the pressure inserted wheel hub cap
D-fig. 6;

❒ loosen the bolts of the wheel to be re-

placed by about one turn with the
wrench provided E-fig. 7; if the car
is fitted with alloy rims, shake the car
to facilitate removing this rim from the
wheel hub;

❒ take out the space-saver spare wheel

B-fig. 4 to access the tool container
C-fig. 5;

❒ take out the tool container C-fig. 5

and take it near to the wheel to be
changed;

❒ remove the spacer set under the

space-saver spare wheel to house the
standard size wheel.

IMPORTANT: failing to observe this pre-
scription could cause boot floor breaking.

fig. 5

F0L0219m

fig. 7

F0L0366m

fig. 6

F0L0370m

157-192 Croma TRW GB 28-09-2007 14:14 Pagina 162