beautypg.com

Displaying the screen, Covering the monitor cables, Adjusting screen height and angle – Eizo FlexScan S1932 User Manual

Page 7

background image

5

English

Troubleshooting

Setting/Adjustment

Prior to use

Installation

Displaying the Screen

1

Press to turn on the monitor.

The monitor’s power indicator lights up blue.

2

Turn on the PC.

The screen image appears.

When turning on the monitor and PC for the first time with the analog signal, the Auto Adjustment

function works to adjust the clock, phase, and display position automatically.

Attention

• Turn off the monitor and PC after using them. Unplugging the power cord completely shuts off power

supply to the monitor.

Covering the Monitor Cables

If you have purchased the monitor with the tilt stand, the height adjustable stand or the EZ-UP stand, cover the monitor

cables with the cable holder.

Cable holder

Tilt stand

Height adjustable stand

EZ-UP stand

Adjusting Screen Height and Angle

Adjust the screen height, tilt and swivel the screen to the best condition for working.

Tilt stand

Hold left and right edge of

the monitor with both hands

to adjust the screen angle.

Height adjustable stand

Hold left and right edge of the

monitor with both hands to

adjust the screen up, down,

left and right directions.

ArcSwing 2 stand

Hold left and right edge of the monitor with both

hands to adjust the screen to and fro, and left and

right directions.

EZ-UP stand

Hold the left and right edges of the monitor with both

hands and adjust the screen angle by moving them

upwards, downwards, or to the left or right.