Swarovski Optik Z3 4-12x50 - Manual (Page 8)

15
DE
14
DE EN EN
When the shot is low
turn the knurled
knob of the elevation
turret in the direction
of H.
When the shot is high
turn the knurled
knob of the elevation
turret in the opposite
direction to H.
When the shot is to the left
turn the knurled
knob of the windage
turret in the direction
of r.
When the shot is to the right
turn the knurled
knob of the windage
turret in the opposite
direction to r.
the impact point correction per click can be taken
from the enclosed technical data sheet or the infor-
mation printed on the elevation or windage adjust-
ment turret of your rifle scope.
Zero point adjustment
once you have aligned the scope to the rifle, you can
retain this basic setting. the scale for this is located
on the respective knurled knob of the elevation/
windage adjustment turret.
1. Pull the knurled
knob upwards.
in this position the
reticle is not adjus-
ted when the knurled
knob is twisted.
2. turn the knurled knob until the zero point of
the scale is aligned with the index point on the
scope.
3. Pushing the knurled knob back down re-engages
the reticle adjustment and the knurled knob. Your
individual setting is now precisely adjusted as the
zero point.
operation
adjusting the Focus
Simply turn the dioptric correction ring to achieve the
best focus for your individual setting of the reticle.
First turn the diop-
tric correction ring all
the way to the left ➀
(counter-clockwise)
and then to the right
➁
, until the reticle is
optimally focused.
the adjustment ranges depend on the individual
models. Please consult the technical data sheet
enclosed.
changing the magnification
You can set the desired
magnification by turning
the (stepless) magni-
fication adjustment ring
through 180°. the scale
on the adjustment ring
allows simple and easy
reading of the setting.
the soft, ribbed covering
of the adjustment ring has a nose for better orien-
tation.
1
2