STIEBEL ELTRON SBP E с 01.10.2012 - Manual (Page 16)

16 | SBP E | SBP E SOL | SBP E cool www.stiebel-eltron.com
WaRRanty
EnvIROnmEnt and REcycLIng
InStaLLatIOn | WaRRanty | EnvIROnmEnt and REcycLIng
9.2 data table
SBP 200 E SBP 200 E cool SBP 400 E SBP 400 E cool SBP 700 E SBP 700 E SOL
185458 227590 220824 227591 185459 185460
Hydraulic data
Nominal capacity
l 200 200 400 400 700 700
Contents, indirect coil bottom l 12.2
Surface area, lower indirect coil m² 2
Pressure drop at 1.0 m³/h indirect coil bottom hPa 28
Application limits
Maximum charge / discharge flow rate
m 3 /h 1.6 1.6 3.1 3.1 5.5 5.5
Max. permissible pressure MPa 0.3 0.3 0.3 0.3 0.3 0.3
Test pressure MPa 0.45 0.45 0.45 0.45 0.45 0.45
Max. permissible temperature °C 95 95 95 95 95 95
Max. recommended collector aperture area m² 14
Energetic data
Standby energy consumption/24 h at 65 °C
kWh 1.5 1.1 2 1.6 2.2 2.2
Dimensions
Height
mm 1535 1535 1710 1710 1890 1890
Diameter mm 630 630 750 750 910 910
Height when tilted mm 1650 1650 1800 1800 2000 2000
Weight
Weight (full)
kg 256 258 479 481 885 902
Weight (empty) kg 56 58 79 81 185 216
Warranty
The warranty conditions of our German companies do not
apply to appliances acquired outside of Germany. In countries
where our subsidiaries sell our products, it is increasingly the
case that warranties can only be issued by those subsidiaries.
Such warranties are only granted if the subsidiary has issued
its own terms of warranty. No other warranty will be granted.
We shall not provide any warranty for appliances acquired in
countries where we have no subsidiary to sell our products.
This will not affect warranties issued by any importers.
Environment and recycling
We would ask you to help protect the environment. After use,
dispose of the various materials in accordance with national
regulations.