SoundMax SM-CMD5003G - Manual (Page 28)

28
3. Touch to reset your adjustment to default values.
4. Touch to quit color setting.
You can also press cursor buttons on the RC to select and adjust parameters.
DVD setup
Press SETUP button on the RC to go to DVD setup menu. Press
cursor buttons on the RC to select parameters and options for
adjustment, press ENTER button to confirm your selection. You can
also touch needed items on the screen as follows:
1. Parameter list. Touch a parameter to select it.
2. Touch to select 1 or 2 menu page.
3. Option list button. Touch to open option list for corresponding
parameter.
Following parameters are available for adjustment:
OSD lang: Select on-screen display language.
Subtitle lang: Select a DVD subtitle language.
Audio lang: select a language of the DVD audio.
DVD menu lang: Select a language of the DVD menu.
Password: In order to make the Rating feature work, the password mode must be turned on. If you want
to set the ratings limit, you will need to enter the default password, which is 0000, then press ENTER to
confirm. To change the password, enter the Password change submenu. If you change the password, the
default password 0000 will be void.
Rating: The Rating control level is for parents to control playing content and protect your children from
violence and erotic. The disc, the level of which is higher than the setting level can not be played.
TV shape: Select 4:3/PS (the wide-screen image shows on the full screen, but some part is cut off),
4:3/LB (the wide-screen image shows and black bars appear on the top and bottom of screen), Wide
(wide-screen image is shown).
NTSC/PAL: Select color system NTSC or PAL.
Default: Reset to the initial factory settings.