SoundMax SM-CMD5003G - Manual (Page 20)

20
Radio operations
User interface of Radio mode
When the unit is switched to Radio mode, the below touchable
user interface will be displayed on the display:
1. PTY button. Touch to enable/disable PTY function. In the
PTY list, touch a program type to start its search.
2. TA button. Touch to enable/disable TA function.
3. AF button. Touch to enable/disable AF function.
4. ST button. Touch to select stereo/mono reception mode.
5. Current band and frequency.
6. Touch to enable navigation mode.
7. Preset station button. Touch to select the station. Touch
and hold to save the current frequency under the preset
number.
8. LOC button. Touch to select local/distant station reception.
9. Mute button; touch to switch sound on/off.
10. Volume down button. Touch to decrease volume.
11. Volume level.
12. Volume up button. Touch to increase volume.
13. BAND button. Touch to select bands.
14. AS/PS button. Touch to scan all saved stations in current band. Touch and hold to find and save 6
available stations in current band.
15. button. Touch for automatic search of the nearest station downwards.
16. button. Touch repeatedly to change frequency step by step downwards.
17. button. Touch repeatedly to change frequency step by step upwards.
18. button. Touch for automatic search of the nearest station upwards.
Band selection
Press BAND/RDM button on the RC to switch to the bands in the following order: FM1 - FM2 - FM3 - MW1 -
MW2.