beautypg.com

1 • changing the dust bag, Cleaning and maintenance, 3 • storing and transporting the appliance – ROWENTA RO54xx serie User Manual

Page 13: Vacuuming

background image

9

EN

The air that we breathe contains particles that may be
allergenic: the larvae and excrement of dust mites, mould
spores, pollen, smoke and animal residues (hair, skin, saliva,
urine). The finest particles can penetrate deeply into the
respiratory system, where they can lead to inflammation and
trigger general deterioration of the entire respiratory system.
The (H)EPA (High) Efficiency Particulate Air Filter system
effectively traps the very finest of particles.
Thanks to the (H)EPA filter, the air returned to the room is
healthier than the air initially sucked into the vacuum cleaner.

1 • Changing the dust bag

The dust bag full indicator lets you know that the dust bag is
full or saturated. If you observe a reduction in the efficiency of
your appliance, set the power to maximum and hold the
nozzle above the floor. If the indicator stays red, change the
dust bag.

a) If your vacuum cleaner is equipped with a Wonderbag*

(17a) :

IMPORTANT: UNIVERSAL Wonderbag* dust bags are
available from your retailer or from Approved
Service Centres.

Remove the hose from the suction opening (Fig 2)
Open the cover of your vacuum cleaner (fig.15).

Remove the bag support from the bag compartment (fig.16).
Remove the Wonderbag* from the bag support (fig.17).
Dispose of the Wonderbag* in a dustbin (fig.18).
Position a new Wonderbag* in the bag support using the ring
(fig.19).
Open out the bag and insert the bag support in the bag
compartment (fig.20).
Check that both the bag and the bag support are correctly
positioned before closing the cover.

b) If your vacuum is equipped with textile bag* (17b):

Textile bags* (ref. RS-RT2274) are available from
Approved Service Centres.

Remove the hose from the suction opening (Fig 2) Open the
cover of your vacuum cleaner (fig.15).
Remove the bag support from the bag compartment (fig.21).
Remove the textile bag* from the bag support (fig.22).
Open the textile bag* with the zip (fig.23) then empty it into a
dustbin (fig.24).
Clean the bag with fresh water and leave it to dry for at least
24 hrs (Fig 25) (do not replace the bag until completely dry)
Reseal the textile bag: ensure that the zip is completely closed
(fig 26) before returning the bag to the appliance.
Reposition the textile bag* on the bag support using the card
flap (fig.27), open out the bag and insert the bag support in the
bag compartment (fig.28).
Check that the bag is correctly positioned before closing the
cover.

CLEANING AND MAINTENANCE

IMPORTANT: Always switch off and unplug your
vacuum cleaner for maintenance.

IMPORTANT: Wonderbags are intended for single
use only and should never be reused.

IMPORTANT: Never operate the vacuum cleaner
without a bag.

CAUTION: COMPACT Wonderbag* dust bags
cannot be used in this appliance. Using them will
damage the appliance and invalidate the guarantee.

Note: you can use your vacuum cleaner in a horizontal
position or in a vertical position, particularly for vacuuming
stairs or curtains.

Adjusting suction power:

with the electric power regulator (fig.8)
with the mechanical power regulator on the handle:

Slide open the mechanical adjuster to manually reduce
suction power and avoid allowing the nozzle to remain ‘stuck’
to the surface being cleaned (fig.9) eg. net curtains, fragile
surfaces etc.

If your model is equipped with the ERGO COMFORT* handle,
open the regulator as appropriate:
• Position

(MIN) for vacuuming delicate textiles (net
curtains, textiles)

• Position (Medium) for the daily cleaning of all lightly

soiled floor surfaces

• Position (MAX) for vacuuming hard floor surfaces and

heavily soiled rugs and carpets

3 • Storing and transporting the

appliance

After use, switch off your vacuum cleaner by pressing the
On/Off pedal, and unplug (fig.10). Retract the power cord by
pressing the power cord rewind pedal (fig.11). In a vertical
position, place the nozzle in the parking position (fig.12). In a
horizontal position, place the nozzle in the parking position
(Fig.13)
You can now transport and store your vacuum cleaner in the
parking position (fig.14).

VACUUMING

*Depending on model: equipment specific
to certain models or optional accessories.