Hama VMPR1 - Manual (Page 3)

ENGLISH
Assembly Instructions for Model: VMPR1
Thank you for choosing a Sanus Systems Model: VMPR1 ceiling mount. The VMPR1 ceiling mount provides a unique, simplified method
of ceiling mounting inverted LCD/DLP projectors. Its low profile design offers roll, pitch, and yaw adjustment. The VMPR1 steel-to-steel
construction with adjustable height to maintain proper ventilation, hold registration for quick lamp changes and easy filter cleaning without
loosing registration. The VMPR1 ceiling mount includes an NPT Extension Pipe that may be used where more room is required, such as
areas with vaulted or cathedral ceilings.
WARNING: The maximum weight to be installed on the VMPR1 ceiling mount is 50 pounds [22.68 Kg]. Improper installation may
result in serious personal injury. Make sure the structural members can support a redundant weight factor five times the total
weight of the equipment. If the structure can not support this weight, reinforce the structure prior to installing the VMPR1.
If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or
contact Sanus at 800.359.5520 or www.sanus.com. Check carefully to make sure that there are no missing or defective parts. Our
customer service representatives can quickly assist you with installation questions and missing or damaged parts. Replacement parts
for products purchased through authorized dealers will be shipped directly to you. Never use defective parts. Do not use this product
for any purpose that is not explicitly specified by Sanus Systems. Please call Sanus Systems before returning products to the point of
purchase.
CSAV, Inc. and its affiliated corporations and subsidiaries (collectively, “CSAV”), intend to make this manual accurate and complete.
However, CSAV makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for
every possible contingency in connection with the installation or use of this product. The information contained in this document is sub-
ject to change without notice or obligation of any kind. CSAV makes no representation of warranty, expressed or implied, regarding the
information contained herein. CSAV assumes no responsibility for accuracy, completeness or sufficiency of the information contained in
this document.
Required Tools: Open End Wrenches, Phillips screwdrivers, Allen Wrenches (provided), other tools may be required depending on the
method of installation.
Supplied Parts and Hardware: (All threaded fasteners are shown full size.)
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA (6901-100023)
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Universal Projector Interface - A
Qty. 1
Extension Arm - B
Qty. 2
Ceiling Plate - C
Qty. 1
Adjustment Bracket - D
Qty. 1
Bottom Cover - G
Qty. 1
Top Cover - H
Qty. 1
NPT Extension Pipe - F
Qty. 1
NPT Adapter - E
Qty. 1