Hama ROC1309 User Manual

Page 2

ROC1309
00131871

Operating Instructions .......................................................... 01
Mode d‘emploi ....................................................................... 03
Bedienungsanleitung ............................................................. 05
Istruzioni per l‘uso ................................................................. 07
Instrucciones de uso ............................................................. 09
Gebruiksaanwijzing ............................................................... 11
Manual de instruções ............................................................ 13
Οδηγίες χρήσης..................................................................... 15
Руководство по эксплуатации ......................................... 17
Instrukcja obsługi ................................................................... 19
Návod k použití ...................................................................... 21
Használati útmutató .............................................................. 23
Bruksanvisning ....................................................................... 25
Brukerveiledning .................................................................... 27
Brugsanvisning ....................................................................... 29
Pistokelaturi ............................................................................ 31

Characteristics - Caractéristiques - Eigenschaften - Caratteristiche

Características - Eigenschappen - Características - χαρακτηριστικά

Технические характеристики - Dane techniczne - Technické údaje

Karakterisztika - Data - Karakteristikker - Data - Ominaisuudet

Dimensions - Dimensions - Abmessungen - Dimensioni - Dimensiones
- Afmetingen - Dimensões -

Διαστάσεις

размеры

- Wymiary - Rozměry

- Méret - Mått - Dimensjoner - Mål - Mitat

= 171 x 49 x 20 mm

Weight = 80 grammes
Poids = 80 grammes
Gewicht = 80 Gramm
Peso = 80 grammi
Peso = 80 gramos
Gewicht = 80 gram
Peso = 80 gramas
Βάρoς = 80

γραμμάρια

вес = 80

грамм

Ciężar = 80 g
Hmotnost = 80 g
Súly = 80 gramm
Vikt = 80 gram
Vekt = 80 gram
Vægt = 80 gram
Paino = 80 grammaa

AAA

This remote control was programmed in the factory, so that you can use it to control most
of the sets of the THOMSON group’s make. For this reason, we recommend that prior to
attempting to programme the remote control, you try it out by means of one of the methods
described in this user manual. However, fi rst of all, you must install 2 batteries (AAA) in the
remote control.
Please keep this guide along with the code list (provided separately), so that you can
subsequently programme your remote control for use with other sets.

Indicator light: The red indicator light is lit
whenever a key is pressed.

: On/Standby or Standby only, depending on

the equipment being used.

The coloured buttons can be used to select
categories when teletext is activated, and specifi c
functions depending on the make.

: Teletext On.

: Teletext Off.

: Teletext Hold (stop page scrolling).
: Displays information of the selected

appliance.

Guide: Electronic Program Guide.

Setup: Allows you to program your remote
before the fi rst use.

P+/P-: Channel Up and Channel Down buttons.

V+/V-: Increases (+) or decreases (-) the volume
of the selected device.

9 OK:

Confi rms a selection.

10 C/D/A/B: Allow you to navigate the menus

verticaly and horizontaly.

11 Exit: Turn off the menu of the selected product.
12 H (Mute): Switches the selected appliance sound

off.

13. Menu: Turns on the menu of the selected product.
14 Numeric keys 0-9: These keys have the same

functions as those of your original remote and
are also used to enter the code.

15 :--/-: In connection with the numeric keys, this

button allows you, with some equipment, to select
directly channels with 2 digits.

16 AV: For selecting an external source (SCART,

HDMI, ...)..

Note: depending on the actual devices, manufacturers

and year of manufacture, the functions available
will vary.

The keys

Testing the remote control before

you programme it

1. Switch on the set you want to control.
2. Direct the remote control towards the TV set and

try to switch it off by simply pressing the key G. If
the device does not turn off, you must program the
remote control using one of the methods A, B, C or
D

described hereafter.

Programming

the remote control

Method A – Fast programming

with 1-digit subcode

Before you start programming, you must fi nd the
subcode of the set to be controlled. Entering a subcode
lets the remote control test a predefi ned list of codes.
Refer to the list provided with these instructions, page I
of the subcodes.
1. Switch on the set you want to control.
2. Hold down the SETUP key until the red indicator

light blinks and then remains lit (the indicator light
remains on for a few seconds to give you the time to
proceed with the following steps. The indicator lamp
fl ashes to signal that this time is almost up, and then
goes off). Release the SETUP key.

3. While the indicator is lit, type in the subcode

(example: 1 for THOMSON).

4. Direct the remote control towards the set and try to

switch it off by pressing the key G.

5. If the set you want to control switches off, press OK

to memorise the code.

6. Should the set not switch off, press key G repeatedly,

until the set switches off. Between pressing the keys,
be sure to leave enough time for the indicator light to
go out and then relight (about 1 second). Proceeding
this way will enable you to see whether the set
responds or not.

7. Immediately upon the switching-off of the set to be

controlled, press OK to store the code.

Check of the programming:
In principle, your set is ready for receiving the remote
control commands.
Check your remote control for proper functioning by
performing the test described on page 2.

Method B – 4-digit codes

programming

Before you start programming, you must fi nd the code
of the set to be controlled.
Refer to the list provided with these instructions, page
II of the codes.
1. Switch on the set you want to control.
2. Hold down the SETUP key until the red indicator

3. While the indicator is lit, enter the fi rst digit of the

4-digit code proposed for the set to be controlled
(example: 0036 for Thomson).

4. Direct the remote control towards the set and try to

switch it off by pressing the key G.

5. Should the set not switch off, repeat step 2. Then

type in the next 4-digit code. Try to switch off the set
by pressing key G once. Repeat this procedure by
trying out each of the 4-digit codes.

Check of the programming:
In principle, your set is ready for receiving the remote
control commands.
Check your remote control for proper functioning by
performing the test described on page 2.

00131871bda.indd 4-Abs1:1

05.10.2009 14:45:22 Uhr