Instructions for use – Hama VS680 User Manual

Page 7

Instructions for use

1. Press the

Power button to switch on

the transmitter (4) and receiver (1).

2. Make sure that the transmitter and the

receiver are set to the same channel by

checking the position of selectors

b, etc. They must be set to the same

channel (same letter).

3. Switch on your equipment (television

sets, video recorders ...) in both rooms.

4. TV2 - Using the remote control of the

unit whose pictures you wish to see, and

from the room containing the second

television set (TV2), select the channels

or video functions (or others) accor-

ding to the unit you are controlling.

To select an other appliance press 8

seconds one of the buttons on the remo-

te control of one of the appliances (in

this case VCR or DVD player). Point the

remote control towards the receiver.

5. TV1 - To view the images from the

appliances connected to the transmitter,

select the AV1 or AV2 sockets on the

main television set TV1.

Special operating details:

No picture on TV2? If you fail to obtain the

desired picture on the second television

set TV2, select the AV socket, to which the

receiver (1) is connected, using the televi-

sion’s remote control.
Using a decoder (in France: Canal +, TPS,

etc.) on your TV2? To have clear images on

your second TV set (TV2), output from the

decoder must pass through a VCR player,

placed in (AV2) mode or set to the chan-

nel number assigned for the encrypted

TV channel. (Refer to the booklet of the

concern equipment).
Use of a monitor? If your second televi-

sion set does not have a connection for

an outside aerial (terrestrial reception), or

if it is a monitor, you will be able to see

the channels in the room containing the

second television set by selecting those

of the video recorder with its remote

control.
The picture is scrambled? The running

of certain equipment (micro-wave ovens,

digital telephone DECT, un-shielded

acoustic loudspeakers, WiFi or Bluetooth

equipments, etc...) may interfere with

signal transmission. Ensure that they are

kept away from the transmitter and the

receiver or switch them off.

Improvement of picture and

sound

Signal transmission may be affected by cer-

tain reflections or other forms of interfe-

rence. In this case, move the transmitter or

the receiver slightly until perfect reception

is restored.
If no picture is obtained, check that the

transmitter and the receiver have not been

installed in the reverse order (each unit

corresponds either to the input or to the

output of the Audio-Video signal). Check

that they have been properly connected

and that they are switched on (

power).

Ensure that the channel selector is set to

the same letter on both units.
If transmission is blurred or scrambled,

choose another channel but make sure

that it is identical on both units.

As a general rule, remember to switch off

units not in use. Also, refer to the manufac-

turers’ instructions to see if there are any

particularities regarding connection or use.

Certain units may need to have their input

scart connection “programmed”.
In all cases the transmitter must be con-

nected to a scart connection that produces

an Audio-Video signal Out. Refer to the

manufacturer’s instructions for confirmation

of this.

VS680 / EN - rst - fr - es / epheme - rst / 08-2006

01_VS680_EN.indd 3

9/08/06 14:58:18