Parrot ASTEROID Smart - Manual (Page 12)

12 English
12 English
while the vehicle is moving. The same applies
to any applications other than those for driving
or navigation assistance.
If you attempt to use an application that is not
intended for navigation or driving assistance
when you are driving, an on-screen warning will
be displayed. To watch a video on the Parrot
ASTEROID Smart's screen, make sure that the
vehicle is stopped in a safe area and that the
parking brake is on.
Steering w heel control interface
A steering wheel control interface can be used
to connect your vehicle’s steering wheel
controls to your Parrot car stereo. With this
interface, you will be able to make phone calls
via the steering wheel controls while keeping
your hands on the wheel. Refer to our website
www.parrot.com for more information.
Installation
Note: We advise our customers to have the
Parrot ASTEROID Smart fitted by a professional.
Safety instructions
Turn the ignition off before installing the
Parrot ASTEROID Smart.
Do not install the Parrot ASTEROID Smart
where it may injure the driver or a passenger if
the vehicle stops suddenly.
Do not install the Parrot ASTEROID Smart
where it may interfere with the driver
operation of the vehicle.
Do not drill holes in the dashboard or any panel
without first making sure there is nothing
behind it. Do not damage any fuel line,
electronic component or cable.
If you need to use screws, do not allow them to
come into contact with any power cable.
Install the Parrot ASTEROID Smart only on
vehicles with a 12 V battery.
Place all cables away from hot places (heater
outlet) and moving parts (gear shift, seat
rails...). Make sure they will never wind around
the steering column or gearstick.
Confirm the proper function of your vehicle's
other equipment after installing the Parrot
ASTEROID Smart.
Do not install the Parrot ASTEROID Smart or
one of its components where the airbag may
deploy.
Do not install the Parrot ASTEROID Smart in
places subject to high temperatures or
humidity.
Make sure you leave enough space behind the
Parrot ASTEROID Smart once installed so that
proper heat dispersal is ensured.
Before you begin
Remove your car stereo from your vehicle. You
may need release keys to do so.
Try to connect the audio and power connectors
of the Parrot ASTEROID Smart to the
connectors of your vehicle. If this connection is
impossible, you have to obtain an ISO adapter
before installing the Parrot ASTEROID Smart.
Refer to the Vehicle compatibility section on
the Parrot ASTEROID Smart support page for
more information.
Compare the Parrot ASTEROID Smart antenna
connector to the antenna connector of your
vehicle. If an adapter is necessary, contact your