Milwaukee VP 6 - Manual (Page 11)

9
Deutsch
D
English
GB
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product described
under “Technical Data” fulfills all the relevant regulations and the
directives 2011/65/EU (RoHs), 2004/108/ EC, 2006/42/EC and the
following harmonized standards have been used:
EN 60204-1:2006+A1:2009
EN ISO 12100:2010
EN 61000-6-1:2007
EN 61000-6-2:2005
EN 61000-6-3:2007+A1:2011
EN 61000-6-4:2007+A1:2011
Winnenden, 2013-06-25
Alexander Krug / Managing Director
Authorized to compile the technical file
Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
MAINS CONNECTION
Connect only to a single-phase AC current supply and only to the
mains voltage specified on the rating plate. Must only be used from
sockets with earth wire.
MAINTENANCE
2 years warranty. Do not clean the vacuum with a high-pressure
cleaner, but rather wipe it off from time to time with a cleaning
rag. Seal off all of the openings on the vacuum before cleaning
with water.
The pre-filter in the water separator should be cleaned regularly
(blow out with compressed air). Do not let liquid enter the airway.
We recommend that regular maintenance be performed according
to the degree of use (annual maintenance recommended).
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,
please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state
the machine type printed as well as the six-digit No. on the label
and order the drawing at your local service agents or directly at:
Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnen-
den, Germany.
SYMBOLS
Please read the instructions carefully before starting
the machine.
Always disconnect the plug from the socket before
carrying out any work on the machine.
Do not dispose of electric tools together with
household waste material! In observance of European
Directive 2002/96/EC on waste electrical and electronic
equipment and its implementation in accordance with
national law, electric tools that have reached the end
of their life must be collected separately and returned
to an environmentally compatible recycling facility.