Fein Cargo - Manual (Page 17)

17 en
Original instructions FSC1.6X/1.6Q/2.0Q.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Do not touch the saw blade. Danger of sharp application tools moving back and forth.
Warning against sharp edges of application tools, such as the cutting edges of the cutter
blades.
Observe the instructions in the text or graphic opposite!
Before commencing this working step, pull the mains plug out of the socket. Otherwise
there will be danger of injury if the power tool should start unintentionally.
Use eye-protection during operation.
Use a dust mask during operation.
Use ear protection during operation.
Use protective gloves during operation.
Observe the information in the adjacent text!
Confirms the conformity of the power tool with the directives of the European Commu-
nity.
Worn out power tools and other electrotechnical and electrical products should be
sorted separately for environment-friendly recycling.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Product with double or reinforced insulation
Weight according to EPTA-Procedure 01/2003
Low oscillation rate
High oscillation rate
WARNING
3 41 01 114 06 0.book Seite 17 Mittwoch, 11. März 2009 10:27 10