beautypg.com

Edimax Technology 3G-6200Wg User Manual

Page 37

background image

36

connection. Sometimes called as Connection ID

Password

Enter the Password provided by your ISP for the PPTP
connection

PPTP Gateway

If your LAN has a PPTP gateway, then enter that PPTP
gateway’s IP address here. If you do not have a PPTP
gateway then enter the ISP’s Gateway IP address, same
as above

Connection ID

This is the ID given by your ISP, and this is optional.

BEZEQ-ISRAE

Select this item if you are using the service provided by
BEZEQ in Israel.

Connection Type

If you select “Continuous”, the router will maintain the
connection to the ISP. If the WAN line breaks down and
links again at a latter time, the router will reconnect to the
ISP automatically; if you select “Connect On Demand”,
the router will auto-connect to the ISP when someone
wants to use the Internet and keep connected until the
WAN idle timeout. The router will close the WAN
connection if the time period that no one is using the
Internet exceeds the “Idle Time”.
If you select “Manual”, the router will connect to ISP only
when you click “Connect” manually from the Web
management interface. The WAN connection will not be
disconnected because of idle timeout. If the WAN line
breaks down and got connected again at a latter time, the
router will not connect to the ISP by itself.

Idle Time

You can specify an idle time threshold (minutes) for the
WAN port. This means if no packets has been sent (no
one using the Internet) throughout this specified period,
then the router will automatically disconnect the
connection to your ISP.

Note: This “idle timeout” function may not work due to
abnormal activities of some network application software,
computer virus or hacker attacks from the Internet. For
example, some software sends network packets to the
Internet in the background, even when you are not using
the Internet. So please turn off your computer when you
are not using it. This function also may not work with
some ISP. So please make sure this function can work
properly when you use this function in the first time,
especially your ISP charge you by time used