Edimax Technology EW-7228APn - Manual (Page 42)

42
points also using the same mode, and all connected Ethernet clients of all
access points will be connected together. This allows several physically isolated
networks to communicate with each other.
Note: When you set the device to this
mode, it will still be able to accept regular
wireless clients.
Band Please select the wireless band you wish to
use. By selecting different band settings,
you’ll be able to allow or deny devices using
certain bands.
If you select 2.4GHz (B), 2.4GHz (N), or
2.4GHz (G), only devices using the wireless
band you select (802.11b, 802.11n, or
802.11g) will be able to connect to this
device.
If you select 2.4GHz (B+G), then only
devices using the 802.11b and 802.11g
bands will be able to connect to this device.
If you want to allow 802.11b, 802.11g, and
802.11n devices to connect to this device,
select 2.4GHz (B+G+N).