Edimax Technology EW-7228APn - Manual (Page 38)

38
Wireless Site Survey
When you click the “Select Site Survey” button, a “Wireless Site Survey Table”
will pop up. It will list all available access points nearby.
Note: If the SSID of the access point you wish to
connect to is not listed, try clicking the “Refresh”
button.
Note: The access point you wish to connect to may
have hidden its SSID, in which case it will not be
listed. You will need to manually enter the SSID in
the “MAIN SSID” field of the previous page.
III-2-3. AP Bridge-Point to Point Mode
In this mode, the access point connects to another wireless access point in the
same mode, and all connected Ethernet clients of both devices will be
connected together. This allows two physically isolated networks to
communicate with each other.
Note: When you set the device to this
mode, it will not accept regular wireless
clients any more.