Edimax Technology EdiView32 - Manual (Page 57)

57
This action is related to SMTP server setup; in order to
successfully send e-mail, the SMTP server must be configured and
tested. Please refer to chapter SMTP for related setup.
Remove Action: Select action in action list, click ‘Remove’.
Set Action: Select the desired action in action list, click ‘Set’ to edit. If
the setup icon is marked with white, then the action does not need to
be configured.
Copy Action: Select the action in action list, click ‘Copy’, a pop out
window ‘Copy action <> to….’ will appear as shown below. Multiple
events for the camera can be selected, and clicking ‘OK’ will copy the
action to the checked camera events.
When there are multiple cameras, using copy actions can speed
up the configuration process.