Edimax Technology IC-3100W User Manual

Page 25

1.9 Logging in the Management Interface

Make sure the network camera is correctly powered (Power LED is on), and

then launch Internet Explorer and type the IP address of the network camera in

address bar of Internet Explorer. You should be prompted to input the user

name and password:

Default user name is ‘admin’ and password is ‘1234’. Click ‘OK’ to continue

after user name and password has entered.

If you’re rejected, maybe the password has been modified previously. This

should not happen if this is a newly-purchased camera, however, if you get the

camera from someone else, the password would be changed. Please try to

obtain the correct user name / password, or you’ll have to reset the camera.