Edimax Technology IC-3030iWn User Manual

Page 95

Edit

Select an email address from „Recipient E-Mail Address‟
box, and click „Edit‟ to edit the email address.

Delete

Delete selected email address.

Sender E-Mail

Address

Specify the email address of email sender.

SMTP Server

Specify the IP address or host name of the SMTP server

you wish to use. For most of ISPs they will only allow its
subscriber to use their SMTP server, if you don‟t know

which SMTP server you should use, please refer to the

setting of your email software or ask your ISP / network

administrator.

SMTP port

Specify the port number of the SMTP server you wish to

use here. By default (and the setting of most of SMTP
servers) it‟s „25‟.

SMTP Auth

Select „Enable‟ if your SMTP server requires
authentication, select „Disable‟ if it‟s not required. If you
don‟t know if your SMTP server requires authentication,

please refer to the setting of your email software or ask

your ISP / network administrator.

SMTP Account

Input the SMTP account (username) of your SMTP
server here. In most cases, it‟s the same with your POP3

username (the one you used to receive email). Please

refer to the setting of your email software or ask your ISP
/ network administrator if you‟re not sure about this.

SMTP Password

Input the SMTP password of your SMTP server here. In
most cases, it‟s the same with your POP3 password (the

one you used to receive email). Please refer to the

setting of your email software or ask your ISP / network

administrator if

you‟re not sure about this.

Save settings in this tab.

Cancel

Discard all settings in this tab.