Edimax Technology IC-3030iWn - Manual (Page 119)

118
3. Enable Dynamic DNS function, select
„DynDNS‟ as service provider, and fill
the information you obtained from Dyndns.org into Domain name, Account,
and Password field (these field‟s name may different on your router).
4.4.2 Open Ports Required by IP CAM
To access IP CAM located behind router or firewall, you must open ports on
router or firewall so you can access IP CAM from Internet.
1. Go to your router ‟s setup page, and locate „NAT‟, „Firewall‟, „Port Mapping‟,
„Port Forwarding‟, or similar setup item.
2. Enable this function, and fill IP CAM ‟s IP address in „Private IP‟ (or similar
field), select „TCP‟ or „BOTH‟ as data type, and input these port numbers for
the services you wish to access from Internet: