Edimax Technology EW-7711UTn - Manual (Page 31)

28
To set 802.1x authentication for the access point. Please click ‘802.1X’ tab:
Here are descriptions of every setup item:
Item Name Description
EAP Method
Select 802.1x EAP method from dropdown menu. Please ask the
administrator of the access point you wish to connect to select a
correct EAP method.
Tunnel
Authentication
Select 802.1x tunnel authentication type from dropdown menu.
Please ask the administrator of the access point you wish to connect
to select a correct tunnel authentication method. This pull down
menu is only available when authentication type you use is 'PEAP',
‘TLS / Smart Card', or 'TTLS'.
When you use 'EAP-FAST' as authentication type, the protocol
setting is always 'Generic Token Card' and can not be changed. You
also need to select ‘Soft Token’ or ‘Static Password’ as password in
‘ID \ Password’ setting.
’EAP Fast’ authentication type also have a sub-menu to set EAP
fast-specific parameters:
If you need to use protected authentication credential, check ‘Use
protected authentication credential’ box, and click ‘Import’ to