Edimax Technology IC-3005Wn - Manual (Page 49)

49
2.6 Motion Detection
2.6.1 Basic Settings
Motion detection function makes this IP camera become your non-stop guard.
You don ‟t have to waste all the time monitoring the images from the camera,
and camera will detect all motions for you. Once motion is detected, a captured
image will be sent to you by Email or via FTP.
You can access this menu by clicking „Motion Detection‟ on the top of web
management interface.
The descriptions of every setting in this menu will be given below:
Item Description
Motion Detection
Enable
Select
„Enable‟ to start motion detection, and select
„Disable‟ to disabled it.
Next Event
Detected Interval
Specify the time interval between two motion detections
in seconds. If a motion is detected after last detection
time, and before next detection time, nothing will be send
by Email or via FTP.
Please specify a time interval that suites your need. If the
time interval is too long, you may not be able to know
what is happened between time interval; if the time