Edimax Technology IC-3005Wn - Manual (Page 45)

45
2.5.1 Email Settings
These settings are used to send the captured picture via Email:
The descriptions of every setting in this menu will be given below:
Item Description
Recipient E-Mail
Address
Input the email recipient ‟s Email address here. If you
have more than one Email recipient, please add a ;
(semicolon) mark between every Email address. All
characters shouldn
‟t exceed 127 characters.
SMTP Server Input the IP address or host name of the SMTP server
(the server that delivers the Email for you) here.
If you don ‟t know, please refer to the SMTP server you‟re
using in your Email software (like Outlook, Outlook
Express etc.), or ask your network administrator or ISP.
SMTP Port Input mail server
‟s SMTP port here. Most of mail servers
use port number 25.
Sender E-Mail
Address
Input the Email address of mail sender, this will help you
to identify the Email sent by this IP camera by sender ‟s
Email address.
NOTE: Some mail server would reject to deliver the
Email from unknown sender, it
’s recommended to input
your own Email address here, or any other actual one.
SSL If SSL encryption is required to connect to the SMTP
server, select „Enable‟ or SMTP connection may fail;
select „Disable‟ if your SMTP server doesn‟t support SSL