3 leaving a network & joining another network – Edimax Technology HP-5101K User Manual

Page 20

Text mode
Original mode

5.3 Leaving a Network & Joining another Network

If you want to remove a powerline device from an existing network and add it to

another network, follow the following procedures:

Step 1 Press the “Group” button on the adapter to be removed (adapter B) for at least 10

seconds.

Step 2 Wait for adapter B to be disconnected with adapter A & C.

Step 3 Press the “Group” button on an adapter in another network (adapter D) for less

than 3 seconds. The Power LED will start to blink.

Step 4 Within 120 seconds after the Power LED starts blinking on adapter D, press the

“Group” button on adapter B for at least 3 seconds.

Step 5 Wait for the connection to be established.