Hoover FREEJET FJ180B2 011 - Manual (Page 3)

3
IMPORTANT INFORMATION
This cleaner should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is
fully understood before operating the appliance. Use only attachments recommended or supplied by Hoover. The charger
base is double insulated and must not be earthed.
Electrical Requirements
This Hoover appliance is supplied with a double insulated battery charger which is only suitable for insertion in a 230V (UK
240V) socket outlet. Ensure that the charger rating label matches your voltage supply.
SAFETY REMINDERS
• DO NOT let children play with the appliance or its controls. Please supervise the use of the appliance by older
children, the elderly or the infirm.
• DO NOT use your cleaner outdoors, on wet surfaces or for wet pickup.
• DO NOT pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items.
• DO NOT spray with, or pick up flammable liquids such as cleaning fluids, petrol, etc, or their vapours, as they
may cause an explosion or fire.
• DO NOT replace the NiMH batteries with non rechargable batteries.
• DO frequently clean the dust cup and filter assembly.
• DO return the appliance to the charger base after use to recharge the batteries. Occasionally fully discharge the
batteries to obtain the maximum battery life.
HOOVER SERVICE: To ensure the continued safe and efficient operation of this appliance we recommend that any
servicing or repairs are only carried out by an authorised Hoover service engineer.
PRODUCT COMPONENTS
1 - Main Cleaner 2 - Handheld cleaner 3 - Filters
A. Main Body
B. On/Off Switch
C. On/Off Turbo Switch
D. Push and Go Release button
E. Handheld Cleaning Unit
F. Nozzle release Button
G. Carpet and Floor Nozzle
H. Charger
I. Charger Indicator
J. Power Cord
K. Crevice Tool
L. Dusting Brush
M. Rigid Extension Tube*
N. On/Off Switch
O. Bin Empty Trigger
P. Filter Access Button
Q. Dust Container
R. Filter Screen
S. Filter
PREPARING YOU CLEANER
1. Line up the handle to the main body of the cleaner and push into the main body until it locks in place. [4]
2. Line up the nozzle with the main body and firmly push into the main Body until the nozzle locks into place. [5]
3. Assemble the handheld unit [2] to the main body.
4. Place the cleaner on the charger. For first use, charge your cleaner for 24 hours.
5. The indicator light will illuminate when charging.
Note: To remove the nozzle press the nozzle release button and pull away from the main body.
Note: Use only the charger supplied with your cleaner to recharge.
Important: When charging the cleaner the On/Off switch must be OFF.
Keep the charger plugged into the socket at all times. It is normal for the charger to become warm to the touch when
charging.
If the operating times reduces after repeated use let the cleaner run until it stops then recharge for 24 hours, repeat this
monthly for best results.
GB
* Features vary according to model
0565 5332 Freejet 3 in 1 IM 16 langs.indd 3 30/07/2010 12:53:13