Asus EW2000 - Manual (Page 15)

1 ASUS WiCast EW2000
2. From the Resolution dropdown list, select
120 x 100 as the screen resolution.
3. From the Multiple displays dropdown list,
select either Show desktop only on 1 or
Show desktop only on 2.
4. Click Apply.
5. Click Keep Change on the confirmation
message Do you want to keep these
display settings?, then click OK.
6. From the Generic PnP Monitor and Intel® Graphics Media Accelerator HD
screen, click Monitor and select 0 Hz as the screen refresh rate.
7. Click OK when done.
Using NVIDIA® utility
To use NVIDIA® utility:
1. Launch the NVIDIA Control Panel. Select
Video &Television.
2. Select Change the signal or HD format.
3. Select 100p HDTV signal format.
Using ATI ® utility
To use ATI® utility:
1. Right-click on the Windows® desktop and
select Catalyst(TM) Control Center. You can
also right-click the ATI icon in the Windows
notification area and select Catalyst Control
Center.
2. Select the monitor whose screen resolution you want to adjust.
3. Select Extended Mode as the monitor's desktop mode.
4. Click Yes on the confirmation message.
5. From the Desktop area dropdown list, select your preferred screen
resolution.
6. From the Refresh rate dropdown list, select your preferred rate.
7. When done, click Apply.
8. Click Yes on the confirmation message.
E6158_EW2000_UM.indd 15 10/12/10 4:44:25 PM