Adjusting the screen resolution – Asus EW2000 User Manual
Page 13

1
ASUS WiCast EW2000
5. When your external display and the audio/video device are successfully
connected, the LED signal displays solid white.
NOTES:
• In some locations except USA, Canada, Hong kong, and Singapore,
you need to wait for about a minute before the WiCast receiver can
establish a solid connection when you are using it for the first time.
• To charge the WiCast transmitter, use either the bundled USB power Y
cable or the AC adapter.
• The bundled AC adapter with core is for the transmitter. The other
bundled AC adapter is for the receiver.
• You may purchase a longer HDMI cable for your transmitter, if required.
Adjusting the screen resolution
NOTES:
• You may use any of the following modes to wirelessly extend the
display/video output:
• Show on the notebook only.
• Show on the external display only.
• Show on both the notebook and the external display.
• If both the notebook and the external display supports up to
1080p resolution, then you can enjoy a smoother video output
with the 1080p screen resolution.
• If the notebook and the external display support varied maximum
screen formats, the secondary monitor follows the primary
monitor's screen resolution.
• If you want to manually adjust the maximum screen resolution,
refer to the steps provided in this section.
• This section tells you how to adjust the screen resolution to 1920 x
1080 (or 1080p). You may choose to set your screen to your preferred
resolution.
E6158_EW2000_UM.indd 13
10/12/10 4:44:23 PM