Festool PSBC 400 EB CARVEX User Manual
Page 15
CARVEX
15
GB
Original operating manual
The illustrations specified are located at the be-
ginning and end of the operating manual.
1
Symbols
2
Machine features
3
Intended use
Jigsaws are designed for sawing wood and sim-
ilar materials similar to wood. With the special
saw blades offered by Festool, these machines
can also be used for sawing plastic, steel, alu-
minium, non-ferrous metal and ceramic plates.
The charger TRC 3 is designed for charging the
battery packs listed.
The user bears the responsibility for dam-
age and accidents caused by improper
use.
4
Technical data
1
Symbols .................................. 15
2
Machine features ...................... 15
3
Intended use............................ 15
4
Technical data .......................... 15
5
Safety instructions .................... 16
6
Operation ................................ 17
7
Settings................................... 18
8
Working with the machine .......... 19
9
Service and maintenance ........... 20
10
Accessories .............................. 21
12
Disposal .................................. 22
13
Warranty ................................. 22
14
EU Declaration of Conformity...... 22
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear a dust mask.
Wear ear protection.
Wear protective goggles.
Wear protective gloves.
Do not throw in the household waste.
[1-1]
Chip guard
[1-2]
On/Off switch
[1-3]
Variable speed trigger (only PSBC 400 EB)
[1-4]
Switch lock (only PSBC 400 EB)
[1-5]
Adjusting wheel for stroke speed control
[1-6]
Buttons for releasing the battery pack
[1-7]
Extractor connector
[1-8]
Saw table change lever
[1-9]
Saw blade ejection
[1-10]
Replaceable saw table
[1-11]
Pendulum stroke switch
[1-12]
Base runner
Cordless jigsaws
PSC 400 EB
PSBC 400 EB
Motor voltage
10.8 - 18 V
Stroke speed
1500 - 3800 rpm
1000 - 3800 rpm
Stroke length
26 mm
Pendulum stroke
4 steps
max. inclination (only with accessory
angle table WT-PS 400)
45° to both sides
max. cutting depth (depending on saw blade)
Wood
120 mm
Aluminium
20 mm
Steel
10 mm
Weight without battery pack
1.8 kg
Safety class
/II