Melitta Cremio - Manual (Page 29)

27
GB
Troubleshooting
Problem Cause Solution
After pressing a
button, the indicator
light (Fig. A,
No. 6) flashes three
times.
The lid is not closed
properly.
Close the lid prop-
erly. The closed lid
must be aligned with
the handle.
The appliance is too
hot.
Let the appliance
cool down.
After pressing a
button, the indicator
light (Fig. A,
No. 7) flashes three
times and after that
switches off, the
appliance doesn't
start.
The lid is not closed
properly.
Close the lid
properly. The closed
lid must be aligned
with the handle.
The appliance
stops the process
too early, and the
indicator light turns
off.
The container is
empty or not filled to
the minimum level
and the temperature
monitoring function
was triggered.
Rinse out the
appliance and let it
cool down.
No milk froth Not enough milk, the
attachment doesn't
touch the milk.
Fill up until min.
mark.
Wrong whisk. Use a whisk for
frothing (Fig. A, No
10/11).
Milk froth is
overflowing out
of the top of the
appliance.
The appliance is
overfilled.
Disconnect the plug.
Let the appliance
cool down and then
clean it.
Wrong whisk. Use the right whisk.
Heft_Cremio_2.3.indd 27 21.12.2012 11:25:08