Dremel Газовый паяльник DREMEL VersaTip - Manual (Page 4)

4
ORIGINAL INSTRUCTIONS
Before using the Dremel Versatip, make sure you completely
read and understand this manual.
! WARNING
READ ALL INSTRUCTIONS.
Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
WORK AREA
a. Keep work area clean and well lit. Cluttered and dark areas
invite accidents.
b. Do not keep or bring combustible materials near the tool.
c. Keep children and bystanders away while operating the
tool. Distractions can cause you to lose control.
d. Only use outside or in well-ventilated rooms.
PERSONAL SAFETY
a. Stay alert, watch what you are doing and use common
sense when operating the tool. Do not use the tool while
you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating tools
may result in serious personal injury.
b. Use safety equipment. Always wear eye protection. Safety
equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will
reduce personal injuries.
c. Do not overreach. Keep proper footing and balance at all
times. This enables better control of the tool in unexpected
situations.
d. Dress properly. There is a danger of burning yourself with
the flame or with liquid soldering tin. Wear protective clothing
to protect yourself against burns. Keep your hair, clothing and
gloves away from flame. Loose clothes or long hair can catch
fire.
e. Secure the workpiece. Use a clamping device to hold the
workpiece. This allows you to use both hands to operate the
tool.
f. Keep this manual for future reference.
g. Do not use the appliance when it is leaking, shows any
sign of damage or is malfunctioning.
h. If the appliance is leaking (gas smell) immediately take it
outside and check the tightness without a flame, please
always use soap sud. Filling or refilling the gas cylinder
must be done in a well ventilated place far away from any
possible sources of ignition, open flames, pilot lights,
electrical cookware and away from other persons. Be sure
to observe the safety instructions and warning notices on
the refill cylinder do not make any modifications to the
appliance.
i. Do not work materials containing asbestos (asbestos is
considered carcinogenic).
j. Take protective measures when during work dust can
develop that is harmful to one's health, combustible or
explosive (some dusts are considered carcinogenic); wear
a dust mask and work with dust/ chip extraction when
connectable.
TOOL USE AND CARE
a. Store your tool in an appropriate place with an ambient
temperature between 10°C and 50°C. Allow your tool to
cool off completely before storing. Unused tools should
be stored away from children in a dry location. Switch off
all unused tools.
b.
! WARNING
Always allow the tool to cool fully
before removing / replacing tips and /
or installing / replacing the nozzle.
c.
! WARNING
Extremely flammable gas under
pressure.
d.
! WARNING
Do not use near spark or open
flame.
e.
! WARNING
Do not puncture or incinerate
container or store at temperature
above 50ºC.
f.
! WARNING
Keep out of reach of children.
g.
! WARNING
Do not try to disassemble this unit.
INTENDED USE
The Dremel Versatip is intended for a variety of applications you
will find in the chapter “USE”.
ENVIRONMENT
DISPOSAL
The unit, accessories and packaging should be sorted for
environment-friendly recycling.
SPECIFICATIONS
Description Dremel Versatip
Model number 2000
Power source Refined butane gas
Tank capacity ± 17 ml. / ± 9 grams
Run time ± 45 minutes (highest setting)
± 90 minutes (lowest setting)
Heat-up time Instantly (open flame)
± 25 seconds (tips)
Nominal heat input 12 g/h
(consumption)
Cool-down time
Flame guard: 15 min. (< 25°C)
Tips: 17 min. (< 25°C)
Temperature 1200°C (open flame)
680°C (hot air)
550°C (tips)
Weight 135 grams (empty tool)
GB