Dremel Клеевой пистолет DREMEL - Manual (Page 4)

WORKING SAFELY WITH THIS UNIT IS POSSIBLE ONLY WHEN THE OPERATING
AND SAFETY INFORMATION ARE READ COMPLETELY AND THE INSTRUCTIONS
CONTAINED THEREIN ARE STRICTLY FOLLOWED.
• If the cable is damaged or cut through while working, do not touch the cable but immediately pull the mains plug. Never use
the unit with a damaged cable.
• Before each use of the unit, check the cable and plug. If damage is detected, do not use the unit. Have repairs performed only
by a qualified technician. Never open the unit yourself.
• The unit must not be damp and must also not be operated in damp surroundings.
• Connect units that are used outdoors by means of a fault current protection switch (FI) with a maximum triggering current of
30 mA. Use only an extension cable that is approved for outdoor use.
• Always direct the cable to the rear away from the unit.
• For pauses in the work of more than 30 minutes, pull the mains plug.
• Children may only use the unit under the supervision of adults.
• Dremel is able to ensure flawless functioning of the unit only if the original accessories intended for it are used.
• Do not change nozzles while glue gun is in “on” position, plugged in, or warm to the touch. Before changing nozzles, make
sure glue gun is cool to the touch, unplugged, and the switch is in the “off” position.
INTENDED USE
The glue gun is intended for the quick gluing of clean, dry and grease-free materials with glue heated to its melting point.
ENVIRONMENT
GB
4
GENERAL SAFETY INSTRUCTIONS
DISPOSAL
The unit, accessories and packaging should be sorted for
environment-friendly recycling.
ONLY FOR EC COUNTRIES
Do not dispose of power tools into household waste!
According to the European Guideline 2002/96/EC for
Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that
are no longer usable must be collected separately and
disposed of in an environmentally correct manner.
SPECIFICATIONS
GENERAL SPECIFICATIONS
Description Dremel Glue Gun
Model number 1200
Rated power
Heating up 140 Watt
Maintaining heat 6 Watt
Heating time 5-6 min.
Glue temperature low (LO) 120 °C
Glue temperature high (HI) 195 °C
Gluing capacity 20 g/min
Glue stick Ø 11 mm
Weight approx. 0.36 kg
Protection Class /II
EXTENSION CORDS
Use completely unrolled and safe extension cords with a
capacity of at least 5 Amps.