3Com Phaser Color Printer 860 - Manual (Page 11)

Advanced Features and Troubleshooting Manual 5
Advanced Features
To print a saved print job or the remaining copies of a proof print job, select the job name
on the printer's front panel:
1. With
Menus
highlighted, press the Scroll Down key to scroll to
Printable Pages
.
2. Press the OK key.
3. If necessary, scroll to
Proof Print Jobs
or
Saved Print Jobs
.
4. Press the OK key.
5. Scroll until you find your job name.
6. Press the OK key.
7. If necessary, scroll to
Print
.
8. Press the OK key.
9. Scroll to the desired number of copies.
10. Press the OK key to print the job.
Deleting secure print, proof print, and saved print jobs
Secure print, proof print, and saved print jobs remain on the printer’s hard drive even
when you turn off the printer. After printing, secure print and proof print jobs are
automatically deleted. However, if you decide you don’t want to print the secure job or
don’t want to print the remaining copies of the proof job, delete the job using the printer’s
front panel. You can also delete saved print jobs.
Note
You will overwrite a proof print, saved print, or secure print job if you send a
second job of the same type with the same name or password.
To delete a secure job, specify the password of the job on the printer's front panel:
1. With
Menus
highlighted, press the OK key.
2. Press the Scroll Down key to scroll to the
Printable Pages Menu
.
3. Press the OK key.
4. If necessary, scroll to
Secure Print Jobs
.
5. Press the OK key.
6. Press the Scroll Down or Scroll Up key to scroll to the correct number for the first
digit of the password, then press the OK key to accept that digit.
7. Repeat step 6 for the second, third, and fourth digits.
8. Scroll to
Delete
.
9. Press the OK key to delete the job with that password.