Internet settings, Connection type – 3Com 3CRWE754G72-A User Manual
Page 44
44
C
HAPTER
5: R
OUTER
C
ONFIGURATION
3 Enter the key for the RADIUS server in the RADIUS Key field.
4 By default, the WPA keys are changed every hour, but if you wish to
change this you can do so by specifying the required time in the Re-key
Interval field, in minutes
5 Click Apply.
Internet Settings
From these pages you can configure the settings for your DSL connection.
Connection Type
Figure 30 Connection Type Screen
The Connection Type screen is used to configured the parameters for
your DSL connection. The information necessary to complete these
screens should be obtained from your ISP.
First, select the DSL connection mode from the four options available:
■
PPPoE - PPP over Ethernet, providing routing for multiple PCs (see
)
■
PPPoA - PPP over ATM, providing routing for multiple PCs (see
)
■
Bridge Mode (for a single PC) - RFC1483 Bridged Mode, for single PCs
only (see
)
■
Routing Mode over ATM - RFC1483 Routed Mode, for multiple PCs
(see
Click Next.