3M Touch Monitor RS-232 - Manual (Page 15)

16 CRT Touch Monitor User Guide
Unpacking Your Touch Monitor
Carefully unpack the carton and inspect the contents. Your CRT
monitor includes an AC power cable, a tilt/swivel stand, a Monitor
Installation Disk, a Product Support brochure, and a 3M Touch
Solutions CD with touch screen software, documentation and
utilities.
Installing the Video Card and Video Driver
Before you can connect your touch monitor, make sure your
computer has a video card and driver already installed for the
monitor. The video driver is supplied by the video card
manufacturer and may be found on the disks that came with your
computer. If you need information on installing a video card or
video driver, refer to your computer documentation for instructions.
Supported Video Display Modes and Refresh Rates
Your video card should support one of the display modes specified
in Table 1. If you select an unsupported video mode, the monitor
may stop working or display unsatisfactory picture quality.
Table 1. Applicable Display Mode and Refresh Rates for
15", 17", and 19"
Display Mode Refresh Rate (Hz)
IBM (640 x 480) 60
IBM (720 x 400) 70
VESA (640 x 480) 85
VESA (800 x 600) 60 (15”and 17” only)
75
85
VESA (1024 x 768) 60 (15”and 17” only)
85
VESA (1280 x 1024) 60