Yamaha YJ125T - Manual (Page 27)

3-10
1
2
3
4
5
6
7
8
9
INSTRUMENT AND CONTROL FUNCTIONS
NOTE:
This check is most reliable if performed with a warmed-
up engine.
The sidestand switch may be defective.
The scooter should not be ridden until checked by a
Yamaha dealer.
The brake switch may be defective.
The scooter should not be ridden until checked by a
Yamaha dealer.
The sidestand switch may be defective.
The scooter should not be ridden until checked by a
Yamaha dealer.
With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is turned on.
3. Turn the key on.
4. Keep the front or rear brake applied.
5. Push the start switch.
Does the engine start?
With the engine still off:
6. Move the sidestand up.
7. Keep the front or rear brake applied.
8. Push the start switch.
Does the engine start?
With the engine still running:
9. Move the sidestand down.
Does the engine stall?
The system is OK. The scooter can be ridden.
NO YES
YES NO
YES NO
5YR-F8199-11ch3.pmd 2004/06/11, 14:12 10