Instrument and control functions – Yamaha YJ125T User Manual
Page 22
3-5
1
2
3
4
5
6
7
8
9
INSTRUMENT AND CONTROL FUNCTIONS
EAU13210
Fuel
1
ZAUM00**
1. Fuel tank filler tube
Make sure that there is sufficient fuel in
the tank. Fill the fuel tank to the bottom
of the filler tube as shown.
EAU13440
Catalytic converter
This vehicle is equipped with a catalytic
converter in the muffler.
EWA10860
w
The exhaust system is hot after op-
eration. Make sure that the exhaust
system has cooled down before do-
ing any maintenance work.
ECA10700
c
C
The following precautions must be
observed to prevent a fire hazard or
other damages.
8
8
8
8
8 Use only unleaded gasoline. The
use of leaded gasoline will cause
unrepairable damage to the cata-
lytic converter.
8
8
8
8
8 Never park the vehicle near pos-
sible fire hazards such as grass
or other materials that easily
burn.
8
8
8
8
8 Do not allow the engine to idle
too long.
NOTE:
The fuel tank cap cannot be installed
unless the key is in the lock. In addi-
tion, the key cannot be removed if the
cap is not properly installed and locked.
EWA10130
w
Make sure that the fuel tank cap is
properly installed before riding.
EWA10880
w
8
8
8
8
8 Do not overfill the fuel tank, oth-
erwise it may overflow when the
fuel warms up and expands.
8
8
8
8
8 Avoid spilling fuel on the hot
engine.
ECA10070
c
C
Immediately wipe off spilled fuel with
a clean, dry, soft cloth, since fuel may
deteriorate painted surfaces or plas-
tic parts.
5YR-F8199-11ch3.pmd
2004/06/11, 14:12
5