beautypg.com

Zhone Technologies IMACS Network Device User Manual

Page 43

background image

Zhone Technologies, Inc.

IMACS Product Book, Version 4

March 2001

Page 39


Table 12A—PPO and PPS Line Card Specifications (continued)

Subscriber and Central Office
Interface—Receive Channel

Level generated to 2W port with 0dB loss

0 dBm

±

0.5 Db

Level adjustment

-3 to +2 dB in 0.1 dB increments

Attenuation distortion (relative to 1 kHz)

-0.5 to +1.0 db, 400 Hz to 2800 Hz

Idle channel noise

23 dBrnC

2W Port Characteristics

Maximum connected copper loop

3000 feet, 26 gauge, non-loaded pair

Impedance

900 ohms

Return Loss, voiceband into 900

+ 2.16

µ

F

> 18 dB ERL, > 0 dB SRL LO, HI

Return loss, single frequency into 900

+ 2.16

µ

F

> 25.6 dB @ 8 kHz

Sealing Current Source

Minimum voltage at NI (display set)

15.8 V into a 38 ma sink through 3000 ft

Minimum voltage at NI (non-display set)

14.5 V into a 17 mA sink through 3000 ft

Loop length

0 to 3000 feet

Polarity

Ring lead must be negative relative to tip lead

Sealing Current Sink

<960 ohms DC resistance

8 kHz Signaling Specifications

Signaling method

ASK half duplex, carrier only present during transmission of
information or acknowledgment

Signaling rate

1 kb/s, half duplex

Received 8kHz signal levels at 2W port

.200 to 1.5 V peak to peak

Standards Conformance

BellCore GR 1089-CORE, Section 2

ESD Protection

BellCore GR 1089 section 3 and EN 500
81-1, Level B

Radiated Emissions

BellCore GR 1089 CORE, Section 3

Conducted Emissions

BellCore GR 1089 CORE, Section 3

Immunity

FCC Part 68

Requirements for Connection of Terminal Equipment Systems
and Protective Apparatus to the Telephone Network

FCC Part 15

Subpart B

UL 1459

Standard for Safety, Telephone Equipment

UL 1950

UL Standard for Safety of Information Technology Equipment

CE EN 500 81-1

Electromagnetic compatibility generic emission standard Part 1
Residential, commercial and light industry

CE EN 500 82-1

Electromagnetic compatibility generic immunity standard Part 1
Residential, commercial and light industry

CE EN 60 950/A2

Safety of information technology equipment including electrical
business equipment