ZyXEL Communications PLA470 V2 - Manual (Page 75)

PLA-4xx Series User’s Guide
75
A
P P E N D I X
A
Product Specifications
The following tables summarize the PLA-4xx’s hardware and firmware features.
Table 15 Hardware Specifications
Dimensions (W x D x H) PLA-400/400 v2/402 v2
112 (L) mm x 106 (D) mm x 28.5 (H) mm
PLA-470
162 (L) mm x 118 (D) mm x 40 (H) mm
PLA470 v2
162 (L) mm x 118 (D) mm x 35 (H) mm
PLA-401/PLA401 v2
97 mm (L) x 45 (H) mm x 70 (W) mm
Power Input PLA-400/401 v2
100 - 240 VAC, 50/60 Hz, 0.12 A
PLA-400 v2/402 v2
100 - 240 VAC, 50/60 Hz, 0.13 A
PLA401/470/470 v2
100 - 240 VAC, 50/60 Hz, 0.2 A
Ethernet Port Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
RESET Pressing this button in for less than 3 seconds resets the device to factory
default settings. Network Name becomes HomePlugAV.
Pressing this button in for more than 10 seconds resets the firmware to the
previous version.
ENCRYPT Pressing this button in for less than 3 seconds begins the connection setup
process.
Pressing this button in for more than 10 seconds resets the network name
to a random value.
Coaxial Port PLA 402 v2 only
Operation Environment PLA-400/401/400 v2/470/470 v2
Temperature: 0º C ~ 45º C
Humidity: 5% ~ 95% Noncondensing
PLA401 v2/PLA402 v2
Temperature: 0º C ~ 45º C
Humidity:10% ~ 85% Noncondensing
Storage Environment PLA-400/401/400 v2/470/470 v2
Temperature: -10º C ~ 70º C
Humidity: 10% ~ 85% Noncondensing
PLA401 v2/PLA402 v2
Temperature: - 20º C ~ 60º C
Humidity: 10% ~ 90% Noncondensing