Tuning operation, Automatic tuning, Manual tuning – Yamaha EM-203VCD User Manual
Page 38: E-30, Version 2.0 / playback control, Soft normal max min, Echo
E-30
Normally, if station signals are strong and there is no
interference, quick automatic-search tuning (Automatic
tuning) is possible. However, if signals of the station you
want to select are weak, you must tune to it manually
(Manual tuning).
Automatic tuning
1
Select the tuner by pressing the TUNER INPUT
SELECTOR button so that “TUNER” appears on the
display.
2
Select the reception band (FM or AM) by pressing the
PRESET/TUNING/BAND button confirming it on the
display.
*
Do not select a preset tuning mode (in which
“PRESET” lights up on the display.)
3
Press the AUTO/MAN’L button so that “AUTO” lights up
on the display.
(In this mode, stations are received in stereo or monaural
automatically.)
4
Press the
button to tune to a higher frequency, or
press the
button to tune to a lower frequency.
(When tuned in to a station, “TUNED” will light up on the
display.)
5
If the station where tuning search stopped is not the
desired one, follow step 4 again.
*
If the tuning search does not stop at the desired station,
change to the Manual tuning method as described below.
*
STEREO indicator will light up when an FM stereo
broadcast with sufficient signal strength is received.
Manual tuning
1
1
Follow steps 1 and 2 of the Automatic tuning method.
2
2
Press the AUTO/MAN’L button so that “AUTO”
disappears from the display.
(In this mode, stations are received in monaural.)
3
3
Press and hold the
button to tune to a higher
frequency, or press and hold the
button to tune to a
lower frequency.
Release it just before reaching the desired frequency,
and then press it repeatedly until the desired frequency
appears.
(When tuned in to a station, “TUNED” will light up on the
display.)
Note
If you tune in to an FM station manually, it is received in
monaural automatically to increase the signal quality.
Note
Pressing the TUNER input selector button on the remote
control transmitter switches the tuner from FM to AM mode
and vice versa.
TUNING OPERATION
VIDEO CD CHANGER RECEIVER
VIDEO CD
Version 2.0 / Playback Control
PRESET/TUNING/BAND
A/B/C/D/E
OPEN/CLOSE
DISC
1
DISC
2
DISC
3
DISC
CHANGE
VOLUME
INPUT SELECTOR
VCR•LD/TV•VCD/CD•TAPE/MD•TUNER
VCD/CD
TUNER
MIC TONE
MIC
MIC MIXING
SOFT
NORMAL
MAX
MIN
STANDBY/ON
PHONES
KARAOKE
PROGRAM
ECHO
ECHO
MEMORY
MUSIC
DISPLAY
MEMORY
AUTO/MAN’L
REPEAT
TIME
TIME ADJ
TIMER
HOUR
MIN
INPUT TRIM
STANDBY/ON
TIME
A
PROG
B
C
D
+
I0
E
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
0
PRESET
INPUT
TIME INDEX
INTRO
DIGEST
KARAOKE
SLEEP
VCD/CD
MUSIC
TUNER
PROGRAM
VOLUME
DISC SKIP
RETURN
PREV
NEXT
SELECT
STOP
PLAY/PAUSE
LEVEL
ECHO/KEY
TEST
CENTER/REAR
/DELAY
RANDOM OPEN/CLOSE
INDEX
MODE
VCD/CD
TUNER
4,
3
3
3,
2
2
1
1
2